Download raw body.
Update arm64-qcom-dtb to Linux 6.17
On Fri, 31 Oct 2025 16:47:09 +0100,
Mark Kettenis <mark.kettenis@xs4all.nl> wrote:
>
> No real changes that we care about, but it gets rid of a lot of local
> modifications.
>
> This does introduce separate device trees for the OLED and non-OLED
> versions of the t14s. Our bootloader will continue to load the
> non-OLED version.
>
> ok?
>
Tested on Honor Magicbook, works, impact on dmesg:
@@ -1,7 +1,7 @@
OpenBSD 7.8-current (GENERIC.MP) #51: Wed Oct 29 18:18:41 MDT 2025
deraadt@arm64.openbsd.org:/usr/src/sys/arch/arm64/compile/GENERIC.MP
-real mem = 33760432128 (32196MB)
-avail mem = 32675016704 (31161MB)
+real mem = 33760440320 (32196MB)
+avail mem = 32675024896 (31161MB)
random: good seed from bootblocks
mainbus0 at root: HONOR MagicBook Art 14 Snapdragon
psci0 at mainbus0: PSCI 1.1, SMCCC 1.3, SYSTEM_SUSPEND
@@ -316,10 +315,12 @@
"tpda" at simplebus0 not configured
"funnel" at simplebus0 not configured
smmu1 at simplebus0: disabled
+"iommu" at simplebus0 not configured
qccpucp0 at simplebus0
"rsc" at simplebus0 not configured
"timer" at simplebus0 not configured
"sram" at simplebus0 not configured
+"watchdog" at simplebus0 not configured
"pmu" at simplebus0 not configured
"pmu" at simplebus0 not configured
"pmu" at simplebus0 not configured
FWIW ok kirill@
>
> Index: Makefile
> ===================================================================
> RCS file: /cvs/ports/sysutils/firmware/arm64-qcom-dtb/Makefile,v
> diff -u -p -r1.25 Makefile
> --- Makefile 21 Sep 2025 11:11:21 -0000 1.25
> +++ Makefile 31 Oct 2025 15:41:31 -0000
> @@ -1,8 +1,7 @@
> FW_DRIVER= arm64-qcom-dtb
> -FW_VER= 2.5
> -REVISION= 2
> +FW_VER= 2.6
>
> -DISTNAME= devicetree-rebasing-6.15-dts
> +DISTNAME= devicetree-rebasing-6.17-dts
>
> # can be redistributed, but shouldn't be in normal packages directory as
> # this is only meant for use with fw_update.
> @@ -21,10 +20,13 @@ MAKE_ENV += CPP=clang-cpp
> DTBS= sc8280xp-lenovo-thinkpad-x13s.dtb \
> sc8280xp-microsoft-blackrock.dtb \
> x1e78100-lenovo-thinkpad-t14s.dtb \
> + x1e78100-lenovo-thinkpad-t14s-oled.dtb \
> x1e80100-asus-vivobook-s15.dtb \
> + x1e80100-asus-zenbook-a14.dtb \
> x1e80100-crd.dtb \
> x1e80100-dell-xps13-9345.dtb \
> x1e80100-honor-magicbook-art-14.dtb \
> + x1e80100-hp-elitebook-ultra-g1q.dtb \
> x1e80100-hp-omnibook-x14.dtb \
> x1e80100-lenovo-yoga-slim7x.dtb \
> x1e80100-microsoft-romulus13.dtb \
> Index: distinfo
> ===================================================================
> RCS file: /cvs/ports/sysutils/firmware/arm64-qcom-dtb/distinfo,v
> diff -u -p -r1.4 distinfo
> --- distinfo 8 Jun 2025 18:19:16 -0000 1.4
> +++ distinfo 31 Oct 2025 15:41:31 -0000
> @@ -1,2 +1,2 @@
> -SHA256 (firmware/devicetree-rebasing-6.15-dts.tar.gz) = xotQ8ircmPHSol3IZFWOgqhmV8C3ZUtHc53dttMn5og=
> -SIZE (firmware/devicetree-rebasing-6.15-dts.tar.gz) = 9818098
> +SHA256 (firmware/devicetree-rebasing-6.17-dts.tar.gz) = iktVQN4F+w0nkEJAKKoOdLZMrd8ypN00T0I3govkJiU=
> +SIZE (firmware/devicetree-rebasing-6.17-dts.tar.gz) = 10262834
> Index: patches/patch-src_arm64_qcom_sc8280xp-lenovo-thinkpad-x13s_dts
> ===================================================================
> RCS file: /cvs/ports/sysutils/firmware/arm64-qcom-dtb/patches/patch-src_arm64_qcom_sc8280xp-lenovo-thinkpad-x13s_dts,v
> diff -u -p -r1.4 patch-src_arm64_qcom_sc8280xp-lenovo-thinkpad-x13s_dts
> --- patches/patch-src_arm64_qcom_sc8280xp-lenovo-thinkpad-x13s_dts 26 Jan 2025 13:28:49 -0000 1.4
> +++ patches/patch-src_arm64_qcom_sc8280xp-lenovo-thinkpad-x13s_dts 31 Oct 2025 15:41:31 -0000
> @@ -18,7 +18,7 @@ Index: src/arm64/qcom/sc8280xp-lenovo-th
> };
>
> &pcie4 {
> -@@ -1417,7 +1417,7 @@
> +@@ -1411,7 +1411,7 @@
> };
>
> &usb_2 {
> Index: patches/patch-src_arm64_qcom_x1e78100-lenovo-thinkpad-t14s_dts
> ===================================================================
> RCS file: patches/patch-src_arm64_qcom_x1e78100-lenovo-thinkpad-t14s_dts
> diff -N patches/patch-src_arm64_qcom_x1e78100-lenovo-thinkpad-t14s_dts
> --- patches/patch-src_arm64_qcom_x1e78100-lenovo-thinkpad-t14s_dts 8 Jun 2025 18:19:16 -0000 1.4
> +++ /dev/null 1 Jan 1970 00:00:00 -0000
> @@ -1,530 +0,0 @@
> -Index: src/arm64/qcom/x1e78100-lenovo-thinkpad-t14s.dts
> ---- src/arm64/qcom/x1e78100-lenovo-thinkpad-t14s.dts.orig
> -+++ src/arm64/qcom/x1e78100-lenovo-thinkpad-t14s.dts
> -@@ -92,9 +92,17 @@
> - reg = <1>;
> -
> - pmic_glink_ss0_ss_in: endpoint {
> -- remote-endpoint = <&usb_1_ss0_qmpphy_out>;
> -+ remote-endpoint = <&retimer_ss0_ss_out>;
> - };
> - };
> -+
> -+ port@2 {
> -+ reg = <2>;
> -+
> -+ pmic_glink_ss0_con_sbu_in: endpoint {
> -+ remote-endpoint = <&retimer_ss0_con_sbu_out>;
> -+ };
> -+ };
> - };
> - };
> -
> -@@ -121,9 +129,17 @@
> - reg = <1>;
> -
> - pmic_glink_ss1_ss_in: endpoint {
> -- remote-endpoint = <&usb_1_ss1_qmpphy_out>;
> -+ remote-endpoint = <&retimer_ss1_ss_out>;
> - };
> - };
> -+
> -+ port@2 {
> -+ reg = <2>;
> -+
> -+ pmic_glink_ss1_con_sbu_in: endpoint {
> -+ remote-endpoint = <&retimer_ss1_con_sbu_out>;
> -+ };
> -+ };
> - };
> - };
> - };
> -@@ -169,6 +185,102 @@
> - regulator-boot-on;
> - };
> -
> -+ vreg_rtmr0_1p15: regulator-rtmr0-1p15 {
> -+ compatible = "regulator-fixed";
> -+
> -+ regulator-name = "VREG_RTMR0_1P15";
> -+ regulator-min-microvolt = <1150000>;
> -+ regulator-max-microvolt = <1150000>;
> -+
> -+ gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>;
> -+ enable-active-high;
> -+
> -+ pinctrl-0 = <&usb0_pwr_1p15_reg_en>;
> -+ pinctrl-names = "default";
> -+
> -+ regulator-boot-on;
> -+ };
> -+
> -+ vreg_rtmr0_1p8: regulator-rtmr0-1p8 {
> -+ compatible = "regulator-fixed";
> -+
> -+ regulator-name = "VREG_RTMR0_1P8";
> -+ regulator-min-microvolt = <1800000>;
> -+ regulator-max-microvolt = <1800000>;
> -+
> -+ gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>;
> -+ enable-active-high;
> -+
> -+ pinctrl-0 = <&usb0_1p8_reg_en>;
> -+ pinctrl-names = "default";
> -+
> -+ regulator-boot-on;
> -+ };
> -+
> -+ vreg_rtmr0_3p3: regulator-rtmr0-3p3 {
> -+ compatible = "regulator-fixed";
> -+
> -+ regulator-name = "VREG_RTMR0_3P3";
> -+ regulator-min-microvolt = <3300000>;
> -+ regulator-max-microvolt = <3300000>;
> -+
> -+ gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>;
> -+ enable-active-high;
> -+
> -+ pinctrl-0 = <&usb0_3p3_reg_en>;
> -+ pinctrl-names = "default";
> -+
> -+ regulator-boot-on;
> -+ };
> -+
> -+ vreg_rtmr1_1p15: regulator-rtmr1-1p15 {
> -+ compatible = "regulator-fixed";
> -+
> -+ regulator-name = "VREG_RTMR1_1P15";
> -+ regulator-min-microvolt = <1150000>;
> -+ regulator-max-microvolt = <1150000>;
> -+
> -+ gpio = <&tlmm 188 GPIO_ACTIVE_HIGH>;
> -+ enable-active-high;
> -+
> -+ pinctrl-0 = <&usb1_pwr_1p15_reg_en>;
> -+ pinctrl-names = "default";
> -+
> -+ regulator-boot-on;
> -+ };
> -+
> -+ vreg_rtmr1_1p8: regulator-rtmr1-1p8 {
> -+ compatible = "regulator-fixed";
> -+
> -+ regulator-name = "VREG_RTMR1_1P8";
> -+ regulator-min-microvolt = <1800000>;
> -+ regulator-max-microvolt = <1800000>;
> -+
> -+ gpio = <&tlmm 175 GPIO_ACTIVE_HIGH>;
> -+ enable-active-high;
> -+
> -+ pinctrl-0 = <&usb1_pwr_1p8_reg_en>;
> -+ pinctrl-names = "default";
> -+
> -+ regulator-boot-on;
> -+ };
> -+
> -+ vreg_rtmr1_3p3: regulator-rtmr1-3p3 {
> -+ compatible = "regulator-fixed";
> -+
> -+ regulator-name = "VREG_RTMR1_3P3";
> -+ regulator-min-microvolt = <3300000>;
> -+ regulator-max-microvolt = <3300000>;
> -+
> -+ gpio = <&tlmm 186 GPIO_ACTIVE_HIGH>;
> -+ enable-active-high;
> -+
> -+ pinctrl-0 = <&usb1_pwr_3p3_reg_en>;
> -+ pinctrl-names = "default";
> -+
> -+ regulator-boot-on;
> -+ };
> -+
> - vph_pwr: regulator-vph-pwr {
> - compatible = "regulator-fixed";
> -
> -@@ -655,6 +767,169 @@
> - };
> - };
> -
> -+&i2c3 {
> -+ clock-frequency = <400000>;
> -+
> -+ status = "okay";
> -+
> -+ typec-mux@8 {
> -+ compatible = "parade,ps8830";
> -+ reg = <0x08>;
> -+
> -+ clocks = <&rpmhcc RPMH_RF_CLK3>;
> -+
> -+ vdd-supply = <&vreg_rtmr0_1p15>;
> -+ vdd33-supply = <&vreg_rtmr0_3p3>;
> -+ vdd33-cap-supply = <&vreg_rtmr0_3p3>;
> -+ vddar-supply = <&vreg_rtmr0_1p15>;
> -+ vddat-supply = <&vreg_rtmr0_1p15>;
> -+ vddio-supply = <&vreg_rtmr0_1p8>;
> -+
> -+ reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>;
> -+
> -+ pinctrl-0 = <&rtmr0_default>;
> -+ pinctrl-names = "default";
> -+
> -+ orientation-switch;
> -+ retimer-switch;
> -+
> -+ ports {
> -+ #address-cells = <1>;
> -+ #size-cells = <0>;
> -+
> -+ port@0 {
> -+ reg = <0>;
> -+
> -+ retimer_ss0_ss_out: endpoint {
> -+ remote-endpoint = <&pmic_glink_ss0_ss_in>;
> -+ };
> -+ };
> -+
> -+ port@1 {
> -+ reg = <1>;
> -+
> -+ retimer_ss0_ss_in: endpoint {
> -+ remote-endpoint = <&usb_1_ss0_qmpphy_out>;
> -+ };
> -+ };
> -+
> -+ port@2 {
> -+ reg = <2>;
> -+
> -+ retimer_ss0_con_sbu_out: endpoint {
> -+ remote-endpoint = <&pmic_glink_ss0_con_sbu_in>;
> -+ };
> -+ };
> -+ };
> -+ };
> -+};
> -+
> -+&i2c5 {
> -+ clock-frequency = <400000>;
> -+
> -+ status = "okay";
> -+
> -+ eusb5_repeater: redriver@43 {
> -+ compatible = "nxp,ptn3222";
> -+ reg = <0x43>;
> -+ #phy-cells = <0>;
> -+
> -+ vdd3v3-supply = <&vreg_l13b_3p0>;
> -+ vdd1v8-supply = <&vreg_l4b_1p8>;
> -+
> -+ reset-gpios = <&tlmm 7 GPIO_ACTIVE_LOW>;
> -+
> -+ pinctrl-0 = <&eusb5_reset_n>;
> -+ pinctrl-names = "default";
> -+ };
> -+
> -+ eusb3_repeater: redriver@47 {
> -+ compatible = "nxp,ptn3222";
> -+ reg = <0x47>;
> -+ #phy-cells = <0>;
> -+
> -+ vdd3v3-supply = <&vreg_l13b_3p0>;
> -+ vdd1v8-supply = <&vreg_l4b_1p8>;
> -+
> -+ reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
> -+
> -+ pinctrl-0 = <&eusb3_reset_n>;
> -+ pinctrl-names = "default";
> -+ };
> -+
> -+ eusb6_repeater: redriver@4f {
> -+ compatible = "nxp,ptn3222";
> -+ reg = <0x4f>;
> -+ #phy-cells = <0>;
> -+
> -+ vdd3v3-supply = <&vreg_l13b_3p0>;
> -+ vdd1v8-supply = <&vreg_l4b_1p8>;
> -+
> -+ reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>;
> -+
> -+ pinctrl-0 = <&eusb6_reset_n>;
> -+ pinctrl-names = "default";
> -+ };
> -+};
> -+
> -+&i2c7 {
> -+ clock-frequency = <400000>;
> -+
> -+ status = "okay";
> -+
> -+ typec-mux@8 {
> -+ compatible = "parade,ps8830";
> -+ reg = <0x8>;
> -+
> -+ clocks = <&rpmhcc RPMH_RF_CLK4>;
> -+
> -+ vdd-supply = <&vreg_rtmr1_1p15>;
> -+ vdd33-supply = <&vreg_rtmr1_3p3>;
> -+ vdd33-cap-supply = <&vreg_rtmr1_3p3>;
> -+ vddar-supply = <&vreg_rtmr1_1p15>;
> -+ vddat-supply = <&vreg_rtmr1_1p15>;
> -+ vddio-supply = <&vreg_rtmr1_1p8>;
> -+
> -+ reset-gpios = <&tlmm 176 GPIO_ACTIVE_LOW>;
> -+
> -+ pinctrl-0 = <&rtmr1_default>;
> -+ pinctrl-names = "default";
> -+
> -+ retimer-switch;
> -+ orientation-switch;
> -+
> -+ ports {
> -+ #address-cells = <1>;
> -+ #size-cells = <0>;
> -+
> -+ port@0 {
> -+ reg = <0>;
> -+
> -+ retimer_ss1_ss_out: endpoint {
> -+ remote-endpoint = <&pmic_glink_ss1_ss_in>;
> -+ };
> -+ };
> -+
> -+ port@1 {
> -+ reg = <1>;
> -+
> -+ retimer_ss1_ss_in: endpoint {
> -+ remote-endpoint = <&usb_1_ss1_qmpphy_out>;
> -+ };
> -+ };
> -+
> -+ port@2 {
> -+ reg = <2>;
> -+
> -+ retimer_ss1_con_sbu_out: endpoint {
> -+ remote-endpoint = <&pmic_glink_ss1_con_sbu_in>;
> -+ };
> -+ };
> -+
> -+ };
> -+ };
> -+};
> -+
> - &i2c8 {
> - clock-frequency = <400000>;
> -
> -@@ -697,6 +972,22 @@
> - status = "okay";
> - };
> -
> -+&mdss_dp0 {
> -+ status = "okay";
> -+};
> -+
> -+&mdss_dp0_out {
> -+ data-lanes = <0 1>;
> -+};
> -+
> -+&mdss_dp1 {
> -+ status = "okay";
> -+};
> -+
> -+&mdss_dp1_out {
> -+ data-lanes = <0 1>;
> -+};
> -+
> - &mdss_dp3 {
> - compatible = "qcom,x1e80100-dp";
> - /delete-property/ #sound-dai-cells;
> -@@ -777,6 +1068,37 @@
> - status = "okay";
> - };
> -
> -+&pm8550_gpios {
> -+ rtmr0_default: rtmr0-reset-n-active-state {
> -+ pins = "gpio10";
> -+ function = "normal";
> -+ power-source = <1>; /* 1.8V */
> -+ bias-disable;
> -+ input-disable;
> -+ output-enable;
> -+ };
> -+
> -+ usb0_3p3_reg_en: usb0-3p3-reg-en-state {
> -+ pins = "gpio11";
> -+ function = "normal";
> -+ power-source = <1>; /* 1.8V */
> -+ bias-disable;
> -+ input-disable;
> -+ output-enable;
> -+ };
> -+};
> -+
> -+&pm8550ve_9_gpios {
> -+ usb0_1p8_reg_en: usb0-1p8-reg-en-state {
> -+ pins = "gpio8";
> -+ function = "normal";
> -+ power-source = <1>; /* 1.8V */
> -+ bias-disable;
> -+ input-disable;
> -+ output-enable;
> -+ };
> -+};
> -+
> - &pmc8380_3_gpios {
> - edp_bl_en: edp-bl-en-state {
> - pins = "gpio4";
> -@@ -787,6 +1109,17 @@
> - };
> - };
> -
> -+&pmc8380_5_gpios {
> -+ usb0_pwr_1p15_reg_en: usb0-pwr-1p15-reg-en-state {
> -+ pins = "gpio8";
> -+ function = "normal";
> -+ power-source = <1>; /* 1.8V */
> -+ bias-disable;
> -+ input-disable;
> -+ output-enable;
> -+ };
> -+};
> -+
> - &qupv3_0 {
> - status = "okay";
> - };
> -@@ -914,6 +1247,30 @@
> - output-low;
> - };
> -
> -+ eusb3_reset_n: eusb3-reset-n-state {
> -+ pins = "gpio6";
> -+ function = "gpio";
> -+ drive-strength = <2>;
> -+ bias-disable;
> -+ output-low;
> -+ };
> -+
> -+ eusb5_reset_n: eusb5-reset-n-state {
> -+ pins = "gpio7";
> -+ function = "gpio";
> -+ drive-strength = <2>;
> -+ bias-disable;
> -+ output-low;
> -+ };
> -+
> -+ eusb6_reset_n: eusb6-reset-n-state {
> -+ pins = "gpio184";
> -+ function = "gpio";
> -+ drive-strength = <2>;
> -+ bias-disable;
> -+ output-low;
> -+ };
> -+
> - tpad_default: tpad-default-state {
> - pins = "gpio3";
> - function = "gpio";
> -@@ -1007,6 +1364,34 @@
> - };
> - };
> -
> -+ rtmr1_default: rtmr1-reset-n-active-state {
> -+ pins = "gpio176";
> -+ function = "gpio";
> -+ drive-strength = <2>;
> -+ bias-disable;
> -+ };
> -+
> -+ usb1_pwr_1p15_reg_en: usb1-pwr-1p15-reg-en-state {
> -+ pins = "gpio188";
> -+ function = "gpio";
> -+ drive-strength = <2>;
> -+ bias-disable;
> -+ };
> -+
> -+ usb1_pwr_1p8_reg_en: usb1-pwr-1p8-reg-en-state {
> -+ pins = "gpio175";
> -+ function = "gpio";
> -+ drive-strength = <2>;
> -+ bias-disable;
> -+ };
> -+
> -+ usb1_pwr_3p3_reg_en: usb1-pwr-3p3-reg-en-state {
> -+ pins = "gpio186";
> -+ function = "gpio";
> -+ drive-strength = <2>;
> -+ bias-disable;
> -+ };
> -+
> - wcd_default: wcd-reset-n-active-state {
> - pins = "gpio191";
> - function = "gpio";
> -@@ -1045,7 +1430,7 @@
> - };
> -
> - &usb_1_ss0_qmpphy_out {
> -- remote-endpoint = <&pmic_glink_ss0_ss_in>;
> -+ remote-endpoint = <&retimer_ss0_ss_in>;
> - };
> -
> - &usb_1_ss1_hsphy {
> -@@ -1077,7 +1462,60 @@
> - };
> -
> - &usb_1_ss1_qmpphy_out {
> -- remote-endpoint = <&pmic_glink_ss1_ss_in>;
> -+ remote-endpoint = <&retimer_ss1_ss_in>;
> -+};
> -+
> -+&usb_2 {
> -+ status = "okay";
> -+};
> -+
> -+&usb_2_dwc3 {
> -+ dr_mode = "host";
> -+};
> -+
> -+&usb_2_hsphy {
> -+ vdd-supply = <&vreg_l2e_0p8>;
> -+ vdda12-supply = <&vreg_l3e_1p2>;
> -+
> -+ phys = <&eusb5_repeater>;
> -+
> -+ status = "okay";
> -+};
> -+
> -+&usb_mp {
> -+ status = "okay";
> -+};
> -+
> -+&usb_mp_hsphy0 {
> -+ vdd-supply = <&vreg_l2e_0p8>;
> -+ vdda12-supply = <&vreg_l3e_1p2>;
> -+
> -+ phys = <&eusb6_repeater>;
> -+
> -+ status = "okay";
> -+};
> -+
> -+&usb_mp_qmpphy0 {
> -+ vdda-phy-supply = <&vreg_l3e_1p2>;
> -+ vdda-pll-supply = <&vreg_l3c_0p8>;
> -+
> -+ status = "okay";
> -+};
> -+
> -+&usb_mp_hsphy1 {
> -+ vdd-supply = <&vreg_l2e_0p8>;
> -+ vdda12-supply = <&vreg_l3e_1p2>;
> -+
> -+ phys = <&eusb3_repeater>;
> -+
> -+ status = "okay";
> -+};
> -+
> -+&usb_mp_qmpphy1 {
> -+ vdda-phy-supply = <&vreg_l3e_1p2>;
> -+ vdda-pll-supply = <&vreg_l3c_0p8>;
> -+
> -+ status = "okay";
> - };
> -
> - &usb_2 {
> Index: patches/patch-src_arm64_qcom_x1e80100-asus-vivobook-s15_dts
> ===================================================================
> RCS file: patches/patch-src_arm64_qcom_x1e80100-asus-vivobook-s15_dts
> diff -N patches/patch-src_arm64_qcom_x1e80100-asus-vivobook-s15_dts
> --- patches/patch-src_arm64_qcom_x1e80100-asus-vivobook-s15_dts 8 Jun 2025 18:19:16 -0000 1.4
> +++ /dev/null 1 Jan 1970 00:00:00 -0000
> @@ -1,178 +0,0 @@
> -Index: src/arm64/qcom/x1e80100-asus-vivobook-s15.dts
> ---- src/arm64/qcom/x1e80100-asus-vivobook-s15.dts.orig
> -+++ src/arm64/qcom/x1e80100-asus-vivobook-s15.dts
> -@@ -192,6 +192,20 @@
> - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> - };
> -
> -+ vreg_l4b_1p8: ldo4 {
> -+ regulator-name = "vreg_l4b_1p8";
> -+ regulator-min-microvolt = <1800000>;
> -+ regulator-max-microvolt = <1800000>;
> -+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> -+ };
> -+
> -+ vreg_l13b_3p0: ldo13 {
> -+ regulator-name = "vreg_l13b_3p0";
> -+ regulator-min-microvolt = <3072000>;
> -+ regulator-max-microvolt = <3072000>;
> -+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> -+ };
> -+
> - vreg_l14b_3p0: ldo14 {
> - regulator-name = "vreg_l14b_3p0";
> - regulator-min-microvolt = <3072000>;
> -@@ -209,6 +223,13 @@
> - vdd-l3-supply = <&vreg_s1f_0p7>;
> - vdd-s4-supply = <&vph_pwr>;
> -
> -+ vreg_l3c_0p8: ldo3 {
> -+ regulator-name = "vreg_l3c_0p8";
> -+ regulator-min-microvolt = <912000>;
> -+ regulator-max-microvolt = <912000>;
> -+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> -+ };
> -+
> - vreg_s4c_1p8: smps4 {
> - regulator-name = "vreg_s4c_1p8";
> - regulator-min-microvolt = <1856000>;
> -@@ -401,7 +422,49 @@
> - wakeup-source;
> - };
> -
> -- /* EC? @ 0x5b, 0x76 */
> -+ eusb5_repeater: redriver@43 {
> -+ compatible = "nxp,ptn3222";
> -+ reg = <0x43>;
> -+ #phy-cells = <0>;
> -+
> -+ vdd3v3-supply = <&vreg_l13b_3p0>;
> -+ vdd1v8-supply = <&vreg_l4b_1p8>;
> -+
> -+ reset-gpios = <&tlmm 7 GPIO_ACTIVE_LOW>;
> -+
> -+ pinctrl-0 = <&eusb5_reset_n>;
> -+ pinctrl-names = "default";
> -+ };
> -+
> -+ eusb3_repeater: redriver@47 {
> -+ compatible = "nxp,ptn3222";
> -+ reg = <0x47>;
> -+ #phy-cells = <0>;
> -+
> -+ vdd3v3-supply = <&vreg_l13b_3p0>;
> -+ vdd1v8-supply = <&vreg_l4b_1p8>;
> -+
> -+ reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
> -+
> -+ pinctrl-0 = <&eusb3_reset_n>;
> -+ pinctrl-names = "default";
> -+ };
> -+
> -+ eusb6_repeater: redriver@4f {
> -+ compatible = "nxp,ptn3222";
> -+ reg = <0x4f>;
> -+ #phy-cells = <0>;
> -+
> -+ vdd3v3-supply = <&vreg_l13b_3p0>;
> -+ vdd1v8-supply = <&vreg_l4b_1p8>;
> -+
> -+ reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>;
> -+
> -+ pinctrl-0 = <&eusb6_reset_n>;
> -+ pinctrl-names = "default";
> -+ };
> -+
> -+ /* EC @ 0x76 */
> - };
> -
> - &i2c7 {
> -@@ -563,6 +626,30 @@
> - bias-disable;
> - };
> -
> -+ eusb3_reset_n: eusb3-reset-n-state {
> -+ pins = "gpio6";
> -+ function = "gpio";
> -+ drive-strength = <2>;
> -+ bias-pull-up;
> -+ output-low;
> -+ };
> -+
> -+ eusb5_reset_n: eusb5-reset-n-state {
> -+ pins = "gpio7";
> -+ function = "gpio";
> -+ drive-strength = <2>;
> -+ bias-pull-up;
> -+ output-low;
> -+ };
> -+
> -+ eusb6_reset_n: eusb6-reset-n-state {
> -+ pins = "gpio184";
> -+ function = "gpio";
> -+ drive-strength = <2>;
> -+ bias-pull-up;
> -+ output-low;
> -+ };
> -+
> - hall_int_n_default: hall-int-n-state {
> - pins = "gpio92";
> - function = "gpio";
> -@@ -697,4 +784,57 @@
> -
> - &usb_1_ss1_qmpphy_out {
> - remote-endpoint = <&pmic_glink_ss1_ss_in>;
> -+};
> -+
> -+&usb_2 {
> -+ status = "okay";
> -+};
> -+
> -+&usb_2_dwc3 {
> -+ dr_mode = "host";
> -+};
> -+
> -+&usb_2_hsphy {
> -+ vdd-supply = <&vreg_l2e_0p8>;
> -+ vdda12-supply = <&vreg_l3e_1p2>;
> -+
> -+ phys = <&eusb5_repeater>;
> -+
> -+ status = "okay";
> -+};
> -+
> -+&usb_mp {
> -+ status = "okay";
> -+};
> -+
> -+&usb_mp_hsphy0 {
> -+ vdd-supply = <&vreg_l2e_0p8>;
> -+ vdda12-supply = <&vreg_l3e_1p2>;
> -+
> -+ phys = <&eusb6_repeater>;
> -+
> -+ status = "okay";
> -+};
> -+
> -+&usb_mp_hsphy1 {
> -+ vdd-supply = <&vreg_l2e_0p8>;
> -+ vdda12-supply = <&vreg_l3e_1p2>;
> -+
> -+ phys = <&eusb3_repeater>;
> -+
> -+ status = "okay";
> -+};
> -+
> -+&usb_mp_qmpphy0 {
> -+ vdda-phy-supply = <&vreg_l3e_1p2>;
> -+ vdda-pll-supply = <&vreg_l3c_0p8>;
> -+
> -+ status = "okay";
> -+};
> -+
> -+&usb_mp_qmpphy1 {
> -+ vdda-phy-supply = <&vreg_l3e_1p2>;
> -+ vdda-pll-supply = <&vreg_l3c_0p8>;
> -+
> -+ status = "okay";
> - };
> Index: patches/patch-src_arm64_qcom_x1e80100_dtsi
> ===================================================================
> RCS file: /cvs/ports/sysutils/firmware/arm64-qcom-dtb/patches/patch-src_arm64_qcom_x1e80100_dtsi,v
> diff -u -p -r1.6 patch-src_arm64_qcom_x1e80100_dtsi
> --- patches/patch-src_arm64_qcom_x1e80100_dtsi 14 Aug 2025 20:04:23 -0000 1.6
> +++ patches/patch-src_arm64_qcom_x1e80100_dtsi 31 Oct 2025 15:41:31 -0000
> @@ -1,160 +1,7 @@
> ---- src/arm64/qcom/x1e80100.dtsi.orig Thu Aug 14 21:08:50 2025
> -+++ src/arm64/qcom/x1e80100.dtsi Thu Aug 14 21:09:14 2025
> -@@ -71,8 +71,8 @@
> - reg = <0x0 0x0>;
> - enable-method = "psci";
> - next-level-cache = <&l2_0>;
> -- power-domains = <&cpu_pd0>;
> -- power-domain-names = "psci";
> -+ power-domains = <&cpu_pd0>, <&scmi_dvfs 0>;
> -+ power-domain-names = "psci", "perf";
> - cpu-idle-states = <&cluster_c4>;
> -
> - l2_0: l2-cache {
> -@@ -88,8 +88,8 @@
> - reg = <0x0 0x100>;
> - enable-method = "psci";
> - next-level-cache = <&l2_0>;
> -- power-domains = <&cpu_pd1>;
> -- power-domain-names = "psci";
> -+ power-domains = <&cpu_pd1>, <&scmi_dvfs 0>;
> -+ power-domain-names = "psci", "perf";
> - cpu-idle-states = <&cluster_c4>;
> - };
> -
> -@@ -99,8 +99,8 @@
> - reg = <0x0 0x200>;
> - enable-method = "psci";
> - next-level-cache = <&l2_0>;
> -- power-domains = <&cpu_pd2>;
> -- power-domain-names = "psci";
> -+ power-domains = <&cpu_pd2>, <&scmi_dvfs 0>;
> -+ power-domain-names = "psci", "perf";
> - cpu-idle-states = <&cluster_c4>;
> - };
> -
> -@@ -110,8 +110,8 @@
> - reg = <0x0 0x300>;
> - enable-method = "psci";
> - next-level-cache = <&l2_0>;
> -- power-domains = <&cpu_pd3>;
> -- power-domain-names = "psci";
> -+ power-domains = <&cpu_pd3>, <&scmi_dvfs 0>;
> -+ power-domain-names = "psci", "perf";
> - cpu-idle-states = <&cluster_c4>;
> - };
> -
> -@@ -121,8 +121,8 @@
> - reg = <0x0 0x10000>;
> - enable-method = "psci";
> - next-level-cache = <&l2_1>;
> -- power-domains = <&cpu_pd4>;
> -- power-domain-names = "psci";
> -+ power-domains = <&cpu_pd4>, <&scmi_dvfs 1>;
> -+ power-domain-names = "psci", "perf";
> - cpu-idle-states = <&cluster_c4>;
> -
> - l2_1: l2-cache {
> -@@ -138,8 +138,8 @@
> - reg = <0x0 0x10100>;
> - enable-method = "psci";
> - next-level-cache = <&l2_1>;
> -- power-domains = <&cpu_pd5>;
> -- power-domain-names = "psci";
> -+ power-domains = <&cpu_pd5>, <&scmi_dvfs 1>;
> -+ power-domain-names = "psci", "perf";
> - cpu-idle-states = <&cluster_c4>;
> - };
> -
> -@@ -149,8 +149,8 @@
> - reg = <0x0 0x10200>;
> - enable-method = "psci";
> - next-level-cache = <&l2_1>;
> -- power-domains = <&cpu_pd6>;
> -- power-domain-names = "psci";
> -+ power-domains = <&cpu_pd6>, <&scmi_dvfs 1>;
> -+ power-domain-names = "psci", "perf";
> - cpu-idle-states = <&cluster_c4>;
> - };
> -
> -@@ -160,8 +160,8 @@
> - reg = <0x0 0x10300>;
> - enable-method = "psci";
> - next-level-cache = <&l2_1>;
> -- power-domains = <&cpu_pd7>;
> -- power-domain-names = "psci";
> -+ power-domains = <&cpu_pd7>, <&scmi_dvfs 1>;
> -+ power-domain-names = "psci", "perf";
> - cpu-idle-states = <&cluster_c4>;
> - };
> -
> -@@ -171,8 +171,8 @@
> - reg = <0x0 0x20000>;
> - enable-method = "psci";
> - next-level-cache = <&l2_2>;
> -- power-domains = <&cpu_pd8>;
> -- power-domain-names = "psci";
> -+ power-domains = <&cpu_pd8>, <&scmi_dvfs 2>;
> -+ power-domain-names = "psci", "perf";
> - cpu-idle-states = <&cluster_c4>;
> -
> - l2_2: l2-cache {
> -@@ -188,8 +188,8 @@
> - reg = <0x0 0x20100>;
> - enable-method = "psci";
> - next-level-cache = <&l2_2>;
> -- power-domains = <&cpu_pd9>;
> -- power-domain-names = "psci";
> -+ power-domains = <&cpu_pd9>, <&scmi_dvfs 2>;
> -+ power-domain-names = "psci", "perf";
> - cpu-idle-states = <&cluster_c4>;
> - };
> -
> -@@ -199,8 +199,8 @@
> - reg = <0x0 0x20200>;
> - enable-method = "psci";
> - next-level-cache = <&l2_2>;
> -- power-domains = <&cpu_pd10>;
> -- power-domain-names = "psci";
> -+ power-domains = <&cpu_pd10>, <&scmi_dvfs 2>;
> -+ power-domain-names = "psci", "perf";
> - cpu-idle-states = <&cluster_c4>;
> - };
> -
> -@@ -210,8 +210,8 @@
> - reg = <0x0 0x20300>;
> - enable-method = "psci";
> - next-level-cache = <&l2_2>;
> -- power-domains = <&cpu_pd11>;
> -- power-domain-names = "psci";
> -+ power-domains = <&cpu_pd11>, <&scmi_dvfs 2>;
> -+ power-domain-names = "psci", "perf";
> - cpu-idle-states = <&cluster_c4>;
> - };
> -
> -@@ -322,6 +322,21 @@
> - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
> - qcom,dload-mode = <&tcsr 0x19000>;
> - };
> -+
> -+ scmi {
> -+ compatible = "arm,scmi";
> -+ mboxes = <&cpucp_mbox 0>, <&cpucp_mbox 2>;
> -+ mbox-names = "tx", "rx";
> -+ shmem = <&cpu_scp_lpri0>, <&cpu_scp_lpri1>;
> -+
> -+ #address-cells = <1>;
> -+ #size-cells = <0>;
> -+
> -+ scmi_dvfs: protocol@13 {
> -+ reg = <0x13>;
> -+ #power-domain-cells = <1>;
> -+ };
> -+ };
> - };
> -
> - clk_virt: interconnect-0 {
> -@@ -3708,6 +3723,77 @@
> +Index: src/arm64/qcom/x1e80100.dtsi
> +--- src/arm64/qcom/x1e80100.dtsi.orig
> ++++ src/arm64/qcom/x1e80100.dtsi
> +@@ -3745,6 +3745,77 @@
> status = "disabled";
> };
>
> @@ -232,43 +79,3 @@
> tcsr_mutex: hwlock@1f40000 {
> compatible = "qcom,tcsr-mutex";
> reg = <0 0x01f40000 0 0x20000>;
> -@@ -7959,6 +8045,13 @@
> - };
> - };
> -
> -+ cpucp_mbox: mailbox@17430000 {
> -+ compatible = "qcom,x1e80100-cpucp-mbox";
> -+ reg = <0 0x17430000 0 0x10000>, <0 0x18830000 0 0x10000>;
> -+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
> -+ #mbox-cells = <1>;
> -+ };
> -+
> - apps_rsc: rsc@17500000 {
> - compatible = "qcom,rpmh-rsc";
> - reg = <0 0x17500000 0 0x10000>,
> -@@ -8139,6 +8232,25 @@
> - frame-number = <6>;
> -
> - status = "disabled";
> -+ };
> -+ };
> -+
> -+ sram: sram@18b4e000 {
> -+ compatible = "mmio-sram";
> -+ reg = <0x0 0x18b4e000 0x0 0x400>;
> -+
> -+ #address-cells = <1>;
> -+ #size-cells = <1>;
> -+ ranges = <0x0 0x0 0x18b4e000 0x400>;
> -+
> -+ cpu_scp_lpri0: scp-sram-section@0 {
> -+ compatible = "arm,scmi-shmem";
> -+ reg = <0x0 0x200>;
> -+ };
> -+
> -+ cpu_scp_lpri1: scp-sram-section@200 {
> -+ compatible = "arm,scmi-shmem";
> -+ reg = <0x200 0x200>;
> - };
> - };
> -
> Index: pkg/PLIST
> ===================================================================
> RCS file: /cvs/ports/sysutils/firmware/arm64-qcom-dtb/pkg/PLIST,v
> diff -u -p -r1.7 PLIST
> --- pkg/PLIST 10 Jul 2025 11:38:45 -0000 1.7
> +++ pkg/PLIST 31 Oct 2025 15:41:31 -0000
> @@ -2,11 +2,14 @@ firmware/dtb/
> firmware/dtb/qcom/
> firmware/dtb/qcom/sc8280xp-lenovo-thinkpad-x13s.dtb
> firmware/dtb/qcom/sc8280xp-microsoft-blackrock.dtb
> +firmware/dtb/qcom/x1e78100-lenovo-thinkpad-t14s-oled.dtb
> firmware/dtb/qcom/x1e78100-lenovo-thinkpad-t14s.dtb
> firmware/dtb/qcom/x1e80100-asus-vivobook-s15.dtb
> +firmware/dtb/qcom/x1e80100-asus-zenbook-a14.dtb
> firmware/dtb/qcom/x1e80100-crd.dtb
> firmware/dtb/qcom/x1e80100-dell-xps13-9345.dtb
> firmware/dtb/qcom/x1e80100-honor-magicbook-art-14.dtb
> +firmware/dtb/qcom/x1e80100-hp-elitebook-ultra-g1q.dtb
> firmware/dtb/qcom/x1e80100-hp-omnibook-x14.dtb
> firmware/dtb/qcom/x1e80100-lenovo-yoga-slim7x.dtb
> firmware/dtb/qcom/x1e80100-microsoft-romulus13.dtb
>
--
wbr, Kirill
Update arm64-qcom-dtb to Linux 6.17