From: Stuart Henderson Subject: Re: NEW: comms/zigbee2mqtt [was Re: Node ports and specifically zigbee2mqtt] To: Mikolaj Kucharski , Date: Thu, 05 Dec 2024 22:23:24 +0000 I will commit the original version first when it's reviewed - no point starting a new cycle with a different version at this point. -- Sent from a phone, apologies for poor formatting. On 5 December 2024 20:44:42 Mikolaj Kucharski wrote: > I updated Stuart's port to zigbee2mqtt 1.42.0. Tarball attached. > > Upgraded two of my machines to that version. No issues, but I just > started it, so I would need at least a day of runtime to know more, are > there not surprises. Initial startup and web frontent works. > > > On Wed, Dec 04, 2024 at 08:32:47AM +0000, Mikolaj Kucharski wrote: >> Second machine migrated too. No issues. >> >> Thank you Stuart for making this port. Hugely appreciated. >> >> >> On Tue, Nov 26, 2024 at 08:36:10PM +0000, Mikolaj Kucharski wrote: >> > Works like a charm. No issues. I migrated first of two of my OpenBSD >> > machines with zigbee2mqtt to Stuart's port. I will migrate second >> > machine later this week, but based on what I see here I don't expect >> > issues as machine's setup is basically identical. >> > >> > >> > On Tue, Nov 26, 2024 at 03:57:45PM +0000, Stuart Henderson wrote: >> > > On 2024/11/26 15:56, Stuart Henderson wrote: >> > > > Attached. This sees my zzh ok and things look good - I don't have any >> > > > devices handy that I can hook up to it to test at the moment (I don't >> > > > really want to start taking my ikea setup to pieces just to test ;) >> > > >> > > Actually attached this time ;) >> > > >> > > > : zigbee2mqtt allows you to use your Zigbee devices without the vendor's >> > > > : bridge or gateway. >> > > > : >> > > > : It bridges events and allows you to control your Zigbee devices via >> > > > : MQTT. In this way you can integrate your Zigbee devices with whatever >> > > > : smart home infrastructure you are using. >> > > > : >> > > > : To use it, you will need suitable Zigbee bridge hardware (typically >> > > > : USB-based), Zigbee devices, and an MQTT server (for example, >> mosquitto). >> > > > : >> > > > : zigbee2mqtt has mature support for adapters based on TI zStack, SiLabs >> > > > : EmberZNet, and Dresden Elektronik deCONZ. It has experimental support >> > > > : for some others. Most of these are USB devices presenting as a serial >> > > > : UART (/dev/cuaU*) when running the correct firmware - it has some >> > > > : support for network-based (wifi/ethernet) devices. >> > > > >> > > > tgz attached, user.list diff inline. >> > > > >> > > > Probably of more interest to many porters than the actual software >> > > > itself is the npm handling in the port. It's a multi stage thing - >> > > > >> > > > 1. fetch deps online using npm and prepare a tar of the node_cache >> > > > directory to be uploaded. the "make dist" target does this (largely >> > > > based on what I do in the PHP-based librenms but adapted for npm >> > > > vs composer). >> > > > >> > > > 2. in post-extract (i.e. *before* patching), use npm (pointed at >> > > > the local cache, so network is not needed) to extract. >> > > > >> > > > 3. a build phase is needed for zigbee2mqtt, it converts some >> > > > TypeScript code to js. again this is pointed at the cache. >> > > > >> > > > 4. do-install does a "global" install pointed to the fake-install >> > > > dir (and again the cache, this one was fun to find out as otherwise >> > > > npm would just sit there updating the spinner if network access was >> > > > blocked...). this means that only the end result is packaged, the >> > > > build-only deps are not (181/64M dirs in node_modules in fake, vs >> > > > 407 dirs/170M during build). >> > > > >> > > > (Plus a bit of fiddling so that config goes under /etc, logs under >> > > > /var/log, data under /var/db). >> > > > >> > > > Any test reports or OKs to import? >> > > > >> > > > >> > > > Index: user.list >> > > > =================================================================== >> > > > RCS file: /cvs/ports/infrastructure/db/user.list,v >> > > > diff -u -p -r1.453 user.list >> > > > --- user.list 25 Nov 2024 08:29:28 -0000 1.453 >> > > > +++ user.list 26 Nov 2024 15:41:38 -0000 >> > > > @@ -408,3 +408,4 @@ id user group port >> > > > 897 _croc _croc sysutils/croc >> > > > 898 _icingadb _icingadb net/icinga/icingadb >> > > > 899 _openhab _openhab misc/openhab >> > > > +900 _z2m _z2m comms/zigbee2mqtt >> > > > -- > Regards, > Mikolaj