From: Sebastian Benoit Subject: Re: update net/nfdump To: Peter Haag Cc: ports@openbsd.org, sthen@openbsd.org Date: Wed, 12 Nov 2025 12:23:47 +0100 Peter Haag(peter@pyxis.ch) on 2025-11-11: > Hello porters, > > I am the author of the netflow tool nfdump and have noticed that the nfdump port > for OpenBSD not only lacks some features, but also was not updated for some time. > > I did not found the port maintainer, so I decided to jump into the OpenBSD ports > pond and would like to send my first contribution to the ports list for the nfdump > package. > > - Updated to current version nfdump-1.7.7 > - Add nfpcapd pcap to netflow collector into main package. > - Add nfdump config file > - Unbundle the flow-tools converter into new sub package. > Most people won't need it anyway, therefore get rid of unneeded dependency. > - Remove nsel option. Most people don't have nsel flows anyway. the appropriate > flow output format can be configured in nfdump.conf. The nsel option has no effect > for the code anyway. > > If there is an active maintainer, feel free to use this update. If there is no active > maintainer I would volunteer to take it over. > > - Peter Hi, thanks for the diff. Can you resend with diff -N? You have some new files that are not included otherwise (diff -ruNp). Also see the comment about SHARED_LIBS below. Stuart (in CC) updated the package in the past. Best, Benno > diff -ru nfdump.orig/Makefile nfdump/Makefile > --- nfdump.orig/Makefile Fri Oct 25 15:21:47 2024 > +++ nfdump/Makefile Tue Nov 11 13:20:49 2025 > @@ -1,14 +1,16 @@ > COMMENT-main = tools to collect and process netflow data > COMMENT-nfprofile = filters data from nfdump according to profiles > +COMMENT-ft2nfdump = converts flow-tools files into nfdump format > > -V = 1.7.5 > +V = 1.7.7 > GH_ACCOUNT = phaag > GH_PROJECT = nfdump > GH_TAGNAME = v$V > PKGNAME-nfprofile = nfprofile-$V > +PKGNAME-ft2nfdump = ft2nfdump-$V > > -SHARED_LIBS += nfdump 3.0 > -SHARED_LIBS += nffile 0.0 > +SHARED_LIBS += nfdump 1.77 > +SHARED_LIBS += nffile 1.77 these version numbers cannot go back. On OpenBSD, the library versions are indpendent of the package version. See SHARED_LIBS in bsd.port.mk(5). Do a minor bump if symbols were added, and a major bump when symbols were removed. > CATEGORIES = net > > @@ -16,13 +18,15 @@ > PERMIT_PACKAGE = Yes > > WANTLIB = bz2 c lz4 z zstd > -WANTLIB-main = ${WANTLIB} ft m pthread > +WANTLIB-main = ${WANTLIB} m pthread > > WANTLIB-nfprofile = ${WANTLIB} > WANTLIB-nfprofile += X11 cairo expat freetype glib-2.0 gobject-2.0 harfbuzz > WANTLIB-nfprofile += iconv intl lzma m nfdump nffile pango-1.0 pangocairo-1.0 > WANTLIB-nfprofile += png pthread rrd xcb xml2 > > +WANTLIB-ft2nfdump = ${WANTLIB} ft m pthread > + > COMPILER = base-clang ports-gcc > COMPILER_LANGS = c > DEBUG_PACKAGES = ${BUILD_PACKAGES} > @@ -35,24 +39,30 @@ > CONFIGURE_ARGS += --enable-ftconv \ > --enable-nfprofile \ > --enable-nftrack \ > - --enable-nsel \ > --enable-sflow \ > + --enable-nfpcapd \ > --enable-maxmind \ > --enable-tor \ > + --enable-ja4 \ > --with-rrdpath=${LOCALBASE} \ > --with-ftpath=${LOCALBASE} > > -MULTI_PACKAGES = -main -nfprofile > +MULTI_PACKAGES = -main -nfprofile -ft2nfdump > > LIB_DEPENDS-main = archivers/bzip2 \ > archivers/lz4 \ > - archivers/zstd \ > - net/flow-tools>=0.68.5 > + archivers/zstd > > LIB_DEPENDS-nfprofile = net/rrdtool \ > net/nfdump,-main > + > +LIB_DEPENDS-ft2nfdump = net/flow-tools>=0.68.5 \ > + net/nfdump,-main > + > RUN_DEPENDS-nfprofile = nfdump-$V:net/nfdump,-main > > +RUN_DEPENDS-ft2nfdump = nfdump-$V:net/nfdump,-main > + > post-install: > ${INSTALL_DATA_DIR} ${PREFIX}/share/doc/nfdump > ${INSTALL_DATA} ${WRKSRC}/README ${PREFIX}/share/doc/nfdump > @@ -60,5 +70,6 @@ > CONFIGURE_ENV = LDFLAGS="${LDFLAGS} -L${X11BASE}/lib" \ > ac_cv_path_DOXYGEN= > TEST_FLAGS = TZ=CET > +FAKE_FLAGS = sysconfdir=${PREFIX}/share/examples/nfdump > > .include > diff -ru nfdump.orig/distinfo nfdump/distinfo > --- nfdump.orig/distinfo Fri Oct 25 15:21:47 2024 > +++ nfdump/distinfo Tue Nov 11 12:21:39 2025 > @@ -1,2 +1,2 @@ > -SHA256 (nfdump-1.7.5.tar.gz) = 99HfBP5moXNhOhPRtjIGIVDNY9CO2SmcwlYPUZ7TPi4= > -SIZE (nfdump-1.7.5.tar.gz) = 835261 > +SHA256 (nfdump-1.7.7.tar.gz) = 0LRtbj2o2DFiBPt00g0S14LYUI8BVZ402cMeM/AW15Q= > +SIZE (nfdump-1.7.7.tar.gz) = 873067 > Only in nfdump/pkg: DESCR-ft2nfdump > Only in nfdump/pkg: PLIST-ft2nfdump > diff -ru nfdump.orig/pkg/PLIST-main nfdump/pkg/PLIST-main > --- nfdump.orig/pkg/PLIST-main Fri Oct 25 15:21:47 2024 > +++ nfdump/pkg/PLIST-main Tue Nov 11 13:10:39 2025 > @@ -1,13 +1,13 @@ > @newgroup _nfcapd:649 > @newuser _nfcapd:649:_nfcapd::nfcapd user:/nonexistent:/sbin/nologin > -@bin bin/ft2nfdump > -@bin bin/geolookup > -@bin bin/nfanon > @bin bin/nfcapd > +@bin bin/nfpcapd > @bin bin/nfdump > +@bin bin/nfanon > @bin bin/nfexpire > @bin bin/nfreplay > @bin bin/sfcapd > +@bin bin/geolookup > @bin bin/torlookup > bin/updateGeoDB.sh > bin/updateTorDB.sh > @@ -17,14 +17,17 @@ > @static-lib lib/libnffile.a > lib/libnffile.la > @lib lib/libnffile.so.${LIBnffile_VERSION} > -@man man/man1/ft2nfdump.1 > -@man man/man1/geolookup.1 > -@man man/man1/nfanon.1 > @man man/man1/nfcapd.1 > +@man man/man1/nfpcapd.1 > @man man/man1/nfdump.1 > +@man man/man1/nfanon.1 > @man man/man1/nfexpire.1 > @man man/man1/nfreplay.1 > @man man/man1/sfcapd.1 > +@man man/man1/geolookup.1 > @man man/man1/torlookup.1 > share/doc/nfdump/ > share/doc/nfdump/README > +share/examples/nfdump/ > +share/examples/nfdump/nfdump.conf.dist > +@sample ${SYSCONFDIR}/nfdump.conf